Airblade™ technologyin a tap.
Wash and dryhands at the sink.
See it in action
How to buy
With Airblade™ hand drying technology in a tap, hands can be dried at the sink in just 12 seconds. There's no need for users to move to a separate drying area, so no water is dripped on the floor.
Other hand drying methods take up valuable wall and floor space. With the Dyson Airblade Tap hand dryer, there's room for extra toilet cubicles and other facilities.
Every second, up to 35 litres of air are forced through apertures up to 0.8 mm wide. The result – 690km/h sheets of air that scrape water from hands, drying them hygienically in just 12 seconds.
Saves you money
The Dyson Airblade Tap hand dryer costs an average of just $48 to run for a year. That's up to 69% less than other hand dryers, and up to 97% less than paper towels (see calculations).
Find out more about running costs and use our calculator to see how much you could save by switching to Airblade™ technology.
“Dyson Airblade Tap hand dryers deliver a stylish experience that fits with our cutting-edge brand.”
Davey Barrett, Show Services Manager, The Coca-Cola London Eye
The Dyson Airblade Tap hand dryer takes 12 seconds to dry hands. So users spend less time in the washroom, and busy periods are easier to manage.
The Dyson digital motor V4 is one of the world's smallest fully-integrated 1600W motors. It spins 90,000 times a minute, generating the power that makes Airblade™ technology possible.
Dyson Airblade Tap hand dryers uses a HEPA filter that captures 99.95% of particles the size of bacteria and viruses from the air used to dry hands. So hands are dried with cleaner air, not dirty air.
The HEPA filter removes airborne particles from the air. It has a grille to capture larger debris, a fleece layer to capture fluff and fibres, and a pleated HEPA media to capture particles as small as 0.1 microns.
Points to consider before installation
Each Dyson Airblade Tap hand dryer requires the following supply and fit specification.
For more information, please download our installation advice brochure.
Dry, indoor environments only.Maximum operating elevation 2000m.
Power range 220-240V, 50Hz 1600W
Water pressure between 1-8 bar.Pipe thread 1/2” BSP.
Minimum 100mm distance between floor and motor bucket. AB11 must use metal enclosure as supplied.
For more information on machine dimensions, electrical supply and construction materials, download the technical specification.
Find out recommended mounting heights, clearance distances and more installation information by downloading the technical specification.
Hands are dried in 10-12 seconds.
HEPA filters as standard.
Up to 68% less than other hand dryers.
Lower CO2 emissions,no paper waste.
5 year parts guarantee.
Dyson Airblade™ hand dryer range
Airblade™ hand drying technology in a tap.
Concentrated Airblade™ technology. Now 35% quieter.1
Fast, hygienic hand dryer.
Hear from businesses that are already experiencing Airblade™ technology.
Explore technical specifications, installation guides and information for architects.
Help and support for Airblade™ technology owners from aDyson Airblade™ hand dryer expert.
Buy Dyson Airblade™ technology.