Advanced purification and even room heating
Removes gases and pollutants.
The fully-sealed filtration system combines an activated carbon filter and a glass HEPA filter. They work together to lock in gases and pollutants, preventing dirty air from leaking back into the room.
Glass HEPA filter
Made with 9 metres of borosilicate microfibres, pleated over 200 times. It removes 99.95% of allergens and pollutants as small as 0.1 microns.¹
¹Tested for filtration efficiency at 0.1 microns (EN1822).
Activated carbon filter
Engineered using a dense layer of carbon crystals, and treated with oxygen to make it more porous. This increases the carbon's surface area, further helping to trap gases – such as formaldehyde, benzene and NO₂.
Continually monitors air quality, and reacts
The Dyson Pure Hot+Cool™ purifying fan heater has three intelligent sensors to monitor what's in the air. Using a unique algorithm, it processes the input to provide real-time indoor air quality reports.
Some purifiers and heaters only treat the air surrounding them2
2 Tested on purifiers available in Japan
The new Dyson Pure Hot+Cool™ heats and purifies the whole room
Fast, safe, efficient heating
Positive Temperature Coefficient plates
Self-regulating ceramic plates are positioned at the front of the amp, to heat the air as it leaves the machine. As the plates heat up, they conduct less electricity to help ensure they don’t overheat.
Two airflow modes
The machine has two separate apertures, to release air from either the front or back of the machine. The valve mechanism turns a rotational baffle around the arc of the amplifier, to switch the direction of the airflow.
Delivers a powerful stream of cooling, purified air from the front of the machine.
The machine diverts air through the rear annular at a 45˚ angle, creating a diffused airflow.