Skip navigation

Support for your Dyson Corrale™ straightener

Here you can find video styling guides, useful tips, your user manual and more.

Please check whether your straightener has a two-pin or four-pin Flight-ready tag. For machines with a four-pin tag, there’s a dedicated support page that can be accessed here.

Activate your guarantee

You can get support that's tailored to you, owner exclusives and more when you register your straightener.

Getting started

Getting started

Your Dyson Corrale™ straightener is engineered to be easy to use. To get started, watch our video guide or follow the steps below.

  • Straightener being unlocked

    1. Unlock your straightener

    Simply slide up the Lock button on the front of your straightener to open it.

  • Flight-ready tag being inserted

    2. Dislodge, rotate and replace the Flight-ready tag

    Set the black arrow on the Flight-ready tag to the Home position to enable your straightener's controls. Your tag is tethered to your straightener. If your Flight-ready tag has four pins you can access support here.

  • Straightener being placed in dock

    3. Fully charge your straightener

    To maximise cordless run time, always fully charge your straightener before using it. For further tips on how to maximise run time, see our section below.

  • Woman straightening her hair

    4. Prepare your hair for styling

    Your hair should be dry before you style. To get the best results, make sure it's also tangle-free.

  • Battery icon on the screen

    5. Turn your straightener on

    Press and hold the Power button until a battery icon appears on the screen.

  • Temperature options on the screen

    6. Choose your temperature

    The flexing plates enable enhanced styling with less heat for less hair damage1, so we recommend you try the lowest setting of 165°C first. If you feel you need more heat for your hair type, length or desired style, you can increase the temperature to 185°C or 210°C.

runtime

Six tips to help maximise run time

  1. For maximum run time, start styling from full charge.
  2. Place in the dock between passes, to help boost charge.
  3. Try slow, even passes for more battery-efficient styling.
  4. If your battery is running low, connect the cable while styling for use in Hybrid charge mode.
  5. For longer styling sessions use Hybrid charge mode. Start from fully-charged and keep the cable connected.
  6. Once finished, connect the cable or place on the dock to charge – ready for your next styling session.

Hybrid Charge Mode

Hybrid charge mode explained

In Hybrid charge mode, your straightener adapts its power source. While heating up and styling on your hair, it draws power from the battery and cable. Between passes, when the plates aren’t touching your hair, the cable charges the battery to help give you a longer run time. We recommend you fully charge between uses, so you’re always ready for your next style.

Engineered for balance in the hand

The Dyson Corrale™ straightener may seem heavier when you first pick it up. That’s because it is packed with advanced 4-cell lithium-ion battery technology, giving you maximum styling time and the thermal performance of a corded straightener. The battery’s placement is engineered to help provide balance in the hand. This helps give you maximum control while styling – without the cord.

Dyson Corrale™ straightener user manual

Download your Dyson Corrale™ straightener user manual.

Dyson Corrale™ straightener user manual

3.5MB

Styling guides

Getting the look you want

Your straightener is engineered to create a range of styles. From a straight finish to curls, our video styling guides show you how to get the look you want. You’ll also find some helpful hints and tips on how to make the most of your Dyson Corrale™ straightener.

  • Tips for straightening different hair types

  • Straightening coily hair

  • Creating beach waves

  • Achieving true curls

  • Creating soft waves

  • Achieving flat beach waves

  • Creating C curls

Dyson YouTube

"For more styling guides and hair science facts, you can visit our YouTube channel"

Visit our YouTube channel

"For the latest news and styling inspiration, follow @DysonHair on Instagram"

Follow @DysonHair

Flying with your straightener

International Civil Aviation Organization (ICAO) regulations state that cordless straighteners can only be carried on an aircraft if the heaters are isolated from the battery. To meet these regulations, your Dyson Corrale™ straightener has been designed with a Flight-ready tag that disconnects the battery. You need to set the black arrow on the tag to the Flight-ready position before airport security and leave it in this position throughout the flight.

You can find a step-by-step guide to flying with your straightener below. For machines that have a four-pin Flight-ready tag, support can be found here.

Flight-ready tag removed from straightener

Please note that regulations in Japan mean you will not be able to fly in or out of any Japanese airports with your straightener.

How to fly with your straightener

If your machine has a four-pin Flight-ready tag, please follow the simple steps here.

Airline approval is required if you're traveling with a battery-powered heat-producing product. Cordless straighteners are in this category, so we recommend contacting your airline before you travel. Explain that your straightener has a Flight-ready feature which isolates the heaters from the battery, to meet ICAO regulations. To use it, follow these six simple steps:

  • 1. Before packing your straightener—remove, rotate and replace the Flight-ready tag with the black arrow in the Flight-ready position.

  • 2. Press the Power button and check an aeroplane icon appears on the screen.

  • 3. Close and lock your straightener, then place it in its Heat-resistant travel pouch.

  • 4. Store in your hand luggage, not hold luggage.

  • 5. Leave the Flight-ready tag in the Flight-ready position throughout the flight.

How to fly with your straightener

Dyson Corrale™ straightener

Flight-ready tag lost or removed

Our Flight-ready tag allows you to use your straightener, while meeting airline regulations. If you have removed or lost your tag, please call 0800 298 0298.

Close-up image of flight-ready tag

Useful tips

  • Automatically turns off for peace of mind

    If your straightener is left unattended with the power on for longer than five minutes, it goes into Sleep mode and the flexing plates start to cool down. After a further five minutes, your straightener turns off completely.

  • Assembling the charging dock

    Simply push the two parts of the dock together until they click securely in place. Then connect the Magnetic 360° charging cable to the base.

  • Styling with the cable attached

    If you need to style for longer, you can use your straightener with the cable attached in hybrid charge mode. This will extend the run time but you’ll still need to fully charge between uses, as you'll still be using battery power when styling.

  • Understanding the sounds

    Your straightener makes a range of sounds to prompt you to take an action, or to alert you. You can find out more about the sounds in our video guide.

  • Turning off the prompt sounds

    You can mute the prompt sounds by pressing and holding the Power and Temperature (–) buttons for more than five seconds. For your safety, you can't mute the sounds for Sleep mode or alerts.

  • Changing the temperature units

    You can view your straightener's temperature in Centigrade or Fahrenheit. Simply press and hold the Power and Temperature (+) buttons for more than five seconds to switch between the two.

Maintenance

maintenance

Maintaining your straightener

We recommend regularly cleaning your straightener's plates to remove hair product residue. This keeps them working at their best. First, turn off your straightener and allow the plates to cool down. Then, rub them gently with a damp, lint-free cloth.

Cleaning your staightener

Cleaning your staightener

Frequently asked questions

The Dyson Corrale™ straightener has a Flight-ready feature that disconnects the battery, designed to adhere to International Civil Aviation Organization (ICAO) regulations. Airline approval is required in advance if you're travelling with a battery-powered heat-producing product, so we recommend contacting them before you travel to let them know.

Then you'll need to remove the Flight-ready tag from your straightener before airport security and leave it disconnected throughout the flight. Please note that regulations in Japan mean you will not be able to fly in or out of any Japanese airports with your straightener.

Yes. Your straightener has universal voltage, so you can charge it in countries with different electrical voltages to the one in which you purchased it. You'll still need to check if you need a travel adaptor.

If you haven't done it already, insert your Flight-ready tag into your straightener. This will activate your straightener's controls. You should also fully charge your straightener to 100% before using it. If you're still having trouble getting started, you can watch the video at the top of this page, contact a Dyson Expert using live chat or call 0800 397 667.

Yes. If your straightener is left unattended with the power on for longer than five minutes, the heated flexing plates will automatically start to cool down. An alert will sound every 10 seconds and the Power button will flash. Pressing any button will re-activate your straightener. If left unattended for a further five minutes, your straightener will turn off completely.

Yes. The Dyson Corrale™ straightener comes with a heat-resistant travel pouch to store your straightener when it's in your bag. However, we recommend always allowing your straightener to cool before storing it in the pouch. A Safety lock also secures the plates for storage after use.

We recommend regularly cleaning your straightener's flexing plates, to keep them working at their best. First, turn your straightener off and wait for the plates to cool. Then, gently rub the plates with a damp, lint-free cloth to remove any stubborn hair product residue.

Your straightener will make prompt sounds at times such as when it reaches your desired temperature and when it has low battery. You can mute the prompt sounds by pressing the Power and Temperature (–) buttons at the same time for more than five seconds. For your safety, you can't mute the sounds for Sleep mode or alerts. To turn the prompt sounds back on, press and hold the buttons again.

Yes. You can view your straightener's temperature in Centigrade or Fahrenheit. Simply press and hold the Power and Temperature (+) buttons for more than five seconds to switch between the two. When your preferred unit shows on the screen, release the buttons.

The Vinca blue is a completely new finish for Dyson – flawlessly smooth, it was engineered specifically by CMF engineers. Sometimes, this porcelain texture may appear to change with touch, but it's easily refreshed with a slightly damp cloth after use. Please unplug the machine before cleaning.

The Dyson guarantee

  • 'How to' Logo

    'How to' videos

    To help you get the most from your machine. Quick and easy.

  • Helpful tips Logo

    Helpful tips

    Tailored reminders that will keep your machine working at its best, for longer.

  • Exclusive owners Logo

    Exclusive owner benefits

    Priority access to previews of new Dyson technology, events and offers.

  • Advice Logo

    Expert advice. 7 days a week.

    Freephone and live chat. Open 8am - 8pm Monday to Friday, 8am - 6pm Saturday and Sunday.

  • Parts and labour Logo

    Free Dyson parts and labour

    Replacement parts or repairs if something goes wrong during your guarantee period.

  • Hassle-free replacement Logo

    Hassle-free replacement

    If we can’t repair your machine, we’ll replace it while it's under guarantee. Fast.

We don’t stop caring about our machines once they’re yours. Activating your guarantee allows us to give you a tailored, complementary, direct service for your machine. Even after your guarantee has ended, we’ll still be on hand to help.

Talking to us is easy.

You can call us
Email us
WhatsApp WhatsApp

Thermal damage measured by hair strength, when creating an equivalent straight style using minimal heat. Tested on Corrale with flexing plates vs Corrale with solid plates.